Baumatic BHC607SS User Manual
Page 23
23
o
IMPORTANT: You must observe
the ventilation requirements
shown in the drawing opposite.
o
IMPORTANT: There are ventilation
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o
Carefully turn the hob upside down and
place it on a cushioned mat.
o
IMPORTANT: Do not use a silicon sealant
to seal the appliance against the aperture.
This will make it difficult to remove the hob
from the aperture in future, particularly if it
needs to be serviced.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
There are holes on the base or the sides of the hob that you can
fix the four brackets to. There are three holes in each one of the
brackets.