Baumatic BHC607SS - Manual (Page 14)

14
Switching on a dual circuit cooking zone
The dual circuit cooking zones have two cooking areas that you can
use, a central section and an outer section. You can use the central
section (A) independently or both sections (B) at once.
o
Use the plus (4) or minus (3) buttons of the dual circuit cooking
zone that you wish to use and select a power level.
o
The central section of the duel circuit cooking zone will switch
on.
o
If you wish to also activate the outer section of a duel circuit
zone, you should press the dual circuit ON/OFF button (8).
Switching off a dual circuit’s outer section
o
Both zones of the dual circuit most be switched on.
o
Press the dual circuit ON/OFF button (8) and the outer section
will switch off.
Residual heat indicator
o
After a zone is switched off, the corresponding
cooking zone indicator (2) will show a flashing
letter “H”. This means that the temperature of the
zone is over 60°C and is therefore still high enough
to cause injury.
o
When the temperature of the zone falls below 60°C, then the
letter “H” will go out.
o
IMPORTANT: The residual heat indicator will disappear if the
mains supply to the product is cut.
o
IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB
ZONE, EVEN WHEN THE TEMPERATURE OF IT HAS
DROPPED BELOW 60°C.