Baumatic BO796.5BL - Manual (Page 30)

Ventilation requirements
o
Ensure that the aperture that you will be fitting the oven into is
of the size given in the diagram. This will provide a gap at the
back of the oven to allow air to circulate as shown in the drawing
on the previous page.
o
There should also be a small gap between the top of the oven
and the bottom of the work surface which the oven is built
under.
IMPORTANT: The ventilation requirements shown MUST
be followed; otherwise the oven may not operate
correctly.
My appliance isn’t working correctly
o
The oven isn’t coming on.
*
Check that you have selected a cooking function and a cooking
temperature.
*
Check that the automatic cooking symbol (1) isn’t lit on the LED
display.
o
There appears to be no power to the oven and grill.
*
Check that the appliance has been connected to the electrical
mains supply correctly.
*
Check that the mains fuses are in working order.
o
The grill function works but the main oven does not.
*
Check that you have selected the correct cooking function.
o
The grill and top oven element is not working, or cuts out
for long periods of time during use.
*
Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
30