Baumatic BO796.5BL User Manual
Page 27
Connecting the mains supply cable
o
The mains terminal block is located on the rear of the oven and
the terminals are accessible by removing the terminal block
cover. You should remove the cover screw to access this.
o
The cable connections must be made in accordance with the
diagram below:-
o
The brass links must be positioned as marked in the diagram
above and once established ALL terminal screws must be
tightened down firmly.
o
If when the oven is first switched on, it does not function
correctly, you should recheck that the terminal screws are
all fully tightened between the links. This should be done
before contacting the Customer Care Department.
o
IMPORTANT: The appliance must NOT be connected to the
mains supply by means of a 13A plug and socket.
27