Basler Electric BE1-50/51B-230 - Manual (Page 5)

9252000894 Rev H BE1-50/51B-230/-234/-239 Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to this instruction manual
(9252000894). Revisions are listed in reverse chronological order.
Manual
Revision and Date Change
H, 12/11
 Made changes to reflect that a new connection plug is included with
the relay.
 Updated year of IEEE C37.90 specifications in Section 1.
 Improved description of Locator B (Active/Pickup LED) in Table 2-1.
G, 11/10  Removed all references to a connection plug supplied with relay.
 Added year to IEEE specifications in Section 1.
F, 12/08  Improved Figure 5-4 and Figure 5-8, Target Indicator Test Setup.
 Added GOST-R Certification in Section 1.
 Minor text edits in Section 3 and Section 5.
E, 08/08
 Added 9252000239 (5 amp relay with case).
D, 05/08  Updated Figures 2-2, 2-3, and 2-4 to show new layout of SW3.
 Minor corrections in Section 5, Testing.
C, 03/08  Updated front panel drawings.
B, 11/07
 Added 9252000234 (1 amp relay).
A, 12/06
 Revised target current ranges stated throughout the manual.
 Clarified continuous rating for the current sensing input. Added
derating graph.
 Added IEEE C37.90.2 compliance for radiated interference.
 Added cURus recognition.
 Modified target testing procedure to provide individual testing of the
51 and 50-A targets.
 Added publication number and revision level to the footer of each
page.
—, 10/06
 Initial release