Baja Motorsports RT50-R Operator's Manual - Manual (Page 34)

31
WARNING
NEVER REMOVE THE STRIP OF CAPS
NOR ADD ANY WATER OR ELECTROLYTE.
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red
positive (+) pole of the battery.
(see figure 23)
2. Connect the black negative (-) cable to the
black negative (-) pole of the battery. (see
figure 24)
Note: The red positive (+) cable has a larger
diameter than the black negative (-) cable.
3.
• After charging is complete, press down
firmly with both hands to seat the caps.
(Do not pound or hammer.) The battery is
now sealed. (see figure 25)
• Locate battery compartment on scooter.
The battery compartment is located
under the floorboard. (see figure 26)
• Attach red positive (+) cable to positive
(+) terminal on battery. Then attach
black negative (-) cable to negative (-)
terminal on battery.
Figure 23
Figure 24
Figure 25
Figure 26