Baja Motorsports RT50-R Operator's Manual - Manual (Page 29)

26
WARNING
Improper adjustment of the idle speed could be hazardous.
An idle speed that is too high could cause the scooter to move
forward when you start the engine. This may cause an accident.
Excessive engine wear may also result if idle speed is adjusted
improperly or when the engine is not fully warmed up. Adjust the
idle to the correct speed. Make sure the engine is fully warm before
adjusting the engine idle speed.
Inspect the fuel hose for damage and
fuel leakage. If any defects are found,
the fuel hose must be replaced.
Fuel Hose
Idle speed adjustment
To adjust the idle speed properly, you need a tachometer. If you do not have
one, ask your authorized service center to perform this adjustment.
To adjust the idle speed:
1. Start the engine and warm it up.
2. Turn the engine idle screw in or out so that the engine idle speed is at
1450~1550 r/min.
Engine Idle
adjustment
Screw
Maintenance (continued)