Baja Motorsports BR150-1 Assembly Guide - Manual (Page 10)

Brushguard installation
12. Attach brushguard D to Brushguards B and C behind
seats using M8x58 bolts and M8 nuts with 17ft.lbs. of torque.
13. Attach brushguards E and F to brushguard B and C and the
frame using M8x58 bolts and M8 nuts with 17ft.lbs. of torque.
Frame
Note: Install bolt with
nut on rear side
(closests to rear of
go-kart) of brushguard.
Make sure the brushguard
pad and cover are attach to
brushguards E and F.
Nut