BAFO BF-100C - Manual (Page 19)

USB File Transfer Cable User’s Manual 19
6.2 MAC
Follow the steps below on how to run the PC-Linq application program:
6.2.1 Plug in both ends of the Pc-Linq USB cable to the two computers.
6.2.2 Get into the MAC USB DataBridge folder in the Local HD and run the
MAC USB DataBridge PPC program. It wills popup a window with the
local machine.
6.2.3 The PC-Linq File Manager will appear on your screen and will detect
both the local and remote machine.
7. Power management and Remote Wake-up Function
The PC-Linq cable supports power management of USB. When either of the two
connected PC gets into suspend, the PC-Linq cable will draw less than 500 mA of
current from it. This is essential for the notebook or other mobile PC.
The PC-Linq application program (PC-Linq) also includes the remote wakeup
function. Whenever the remote machine goes into suspend mode, you just click on
any file or folder inside the remote machine folder and the remote machine will
resume to normal operation mode. However, you can disable this function to avoid
the annoyance of suspend-wakeup sequence during operating the PC-Linq
application program. Please click the pull-down menu Option, then click Setting,
and disable the Allow System to Suspend option.
8. Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any
means, electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.