BAFO BF-5231 - Manual (Page 4)

1394a+USB 2.0 Combo 4 Ports Cardbus Quick User’s Guide 4
4.5 Windows ® XP Driver Installation
4.5.1 Put the driver CD into the CD-ROM and run the driver from the
“D:\DRIVER\1394a+USB 2.0 Combo 4 ports Cardbus\Windows\
U2v2_1_4.exe” (D: represent CD-ROM)
4.5.2 Follow the screen to install the driver.
4.5.3 Power off the system. Insert combo Cardbus into an available Cardbus
slot. Power up the system
4.5.4 During OS boot up, Windows will display the “Found New Hardware
wizard”, “Universal Serial Bus (USB) controller”, Click “Next”
4.5.5 Select “Search for a suitable driver for my device (recommended)”
and click “Next”
4.5.6 When the wizard indicates that it found a driver for the device click
“Next”
4.5.7 The wizard will now copy the required driver to the system and start the
driver. After starting the driver the wizard will display a completion
dialog, click “Finish” to exit the wizard
4.6 Verifying the Installation under Windows 2000 and XP
4.6.1 Right click on “My Computer” icon, select “Properties”, left click on
“Hardware” tab, and then on “Device manager” button
4.6.2 Double click “Universal Serial Bus controller”, If there is no yellow
“!” or “?” in front of
NEC PCI to USB Enhanced Host Controller
NEC PCI to USB Open Host Controller
NEC PCI to USB Open Host Controller
USB ROOT Hub
USB ROOT Hub
4.6.3 Double click on “IEEE 1394 Bus host Controllers”, if there is no
yellow “!” or “?” in front of “Texas Instrument OHCI Compliant IEEE
1394 Host Controller” the driver has started correctly
4.6.4 To view information about the device attached to the controller, right
click the “Device” and select Properties from the context menu, then
select the tab labeled “General”
5. Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the
accuracy and completeness of this document and shall in no event be liable for any
loss of profit or any other commercial damage, including but not limited to special,
incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording or information recording
and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.