BAFO BF-5231 - Manual (Page 2)

1394a+USB 2.0 Combo 4 Ports Cardbus Quick User’s Guide 2
4. Software Installation
4.1 Windows ® 98 Driver Installation
4.1.1 Put the driver CD into the CD-ROM and run the driver from the
“D:\DRIVER\1394a+USB 2.0 Combo 4 ports Cardbus\Windows\
U2v2_1_4.exe” (D: represent CD-ROM)
4.1.2 Follow the screen to install the driver.
4.1.3 Power off the system. Insert combo Cardbus into an available Cardbus
slot. Power up the system
4.1.4 During OS boot up, Windows will display the hardware wizard will
display that it found a “NEC USB Open Host Controller”, Click “Next”
4.1.5 Select “Search for a suitable driver for my device (Recommended)”
and click “Next”
4.1.6 If display “Insert Disk” (Please insert the disk labeled windows 98
second edition CD-ROM)
4.1.7 When the wizard indicates that it found a driver for the device, click
“Next”, then click “Finish” to exit the wizard
4.1.8 The Hardware wizard will display that it found a “Texas Instruments
OHCI compliant IEEE 1394 Host Controller”, click “Next”
4.1.9 Select “search for the best driver for your device (Recommended)”
and click “Next”
4.1.10 Select “The updated driver (Recommended)”. Texas Instrument
OHCI Compliant IEEE 1394 Host Controller and click “Next”. Then
click “Next” to continue
4.1.11 If display “Insert Disk” (Please insert the disk labeled windows 98
second edition CD-ROM) and click “OK”, then click “Finish” to exit the
wizard
4.2 Windows ® ME Driver Installation
4.2.1 Put the driver CD into the CD-ROM and run the driver from the
“D:\DRIVER\1394a+USB 2.0 Combo 4 ports Cardbus\Windows\
U2v2_1_4.exe” (D: represent CD-ROM)
4.2.2 Follow the screen to install the driver.
4.2.3 Power off the system. Insert combo Cardbus into an available Cardbus
slot. Power up the system
4.2.4 During OS boot up, Windows will display the hardware wizard will
display that it found a “NEC USB Open Host Controller”, Click “Next”
4.2.5 Select “Search for a suitable driver for my device (Recommended)”
and click “Next”
4.2.6 If display “Insert Disk” (Please insert the disk labeled windows 98
second edition CD-ROM)
4.2.7 When the wizard indicates that it found a driver for the device, click
“Next”, then click “Finish” to exit the wizard
4.2.8 The Hardware wizard will display that it found a “Texas Instruments
OHCI compliant IEEE 1394 Host Controller”, click “Next”
4.2.9 Select “search for the best driver for your device (Recommended)”
and click “Next”