Babycare TENS Obi TENS - Manual (Page 11)

11
Technical Data
Display The LCD has a total of 13 display
segments. The array of Level Bars
consists of 10 LCD Level Bar. In
addition, 2 individual LCD segments
respectively indicate the Modes
(i.e. Burst and Boost). The last LCD
segment is used to illuminate
the low battery indicator.
Mode 2 operation modes
Pulse (Hz) Pulse Pattern
Frequency Width (µs)
Burst 32 200 2 bursts per
second and
8 pulses per
burst
Boost 80 100 Constant
pulse
Output Channel ONE Channel
Output Voltage 0 – 100V (zero-to-peak) across
a 500Ω load; adjustable in 10 steps
Output Intensity 200mA (max.) into a 500Ω load
Output Waveform Symmetrical Mono-phasic rectangular
Output Jacks CE Touch-proof jacks
Battery 2 X1.5V AAA Battery (Type LR03)
Battery Low Detect 2.2V±0.1V
Tolerances All output parameters are subjected
to a ±10% tolerance unless
other specified