Dimplex PowerChef Electric Grill TBQ-120-REG - Manual (Page 24)

24 TBQ-120-DLX Accessories
! NOTE: The following instructions apply to the accessories
included with the Deluxe model of the PowerChef ®
electric grill. These accessories are separately available
for purchase from your authorized Dimplex dealer.
Outlet Accessory
Install the Outlet accessory following step 11 on page
17. The Outlet accessory provides for two (2) devices to
be plugged in for power. Dimplex recommends plugging
the electric grill and Hot Dog Roller Motor into the Outlet
accessory.
more information) or a nearby electric wall socket.
! NOTE: If Skillet and Hot Dog Roller accessories are to be
used simultaneously, install Hot Dog Roller first. Hot Dog
Roller requires installation directly from the side (see step
9, page 15) to prevent damage to the motor.
CAUTION: To avoid burns to skin, do not install any
accessory while grill is hot or operating. Allow grill to
cool for at least 15 minutes before adding any cooking
accessory.
Instructions for Cooking
Ensure power is supplied to the PowerChef 1. ® electric grill.
Plug Hot Dog Roller Motor into Outlet Accessory or 2.
electric wall socket and turn Hot Dog Roller Motor On/Off
Switch (Figure 3) to On (“ I “ position).
Figure 2
Rear view of grill
Outlet Accessory
Exploded view to show detail
Available sockets for power
3 prong plug for power
cord connection
Each of the three (3) outlets are covered by a spring loaded
cover to protect from moisture and cooking residue. The
center and right hand modules (refer to Figure 2) provides an
outlet for power and the left hand module contains a 3 prong
plug for power cord connection.
! NOTE: A 3 (three) core power cord or extension cord
must connect the Outlet accessory to an electrical wall
socket in order to provide power to the other two (2)
module outlets. Cord must be rated for 1875 Watts and a
minimum 14 AWG (not included).
Hot Dog Roller Accessory
Before first use, remove all packing material from Hot Dog
Roller. Hand wash in warm, soapy water and rinse and dry
thoroughly.
Install the Hot Dog Roller and Motor following steps 10 and
11 on pages 16 and 17. Once installed, plug the Hot Dog
Roller Motor power cord into either the center or right most
plug of the Outlet Accessory (refer to description above for
Figure 3
On/Off Switch
Press the ON/SELECT button on the electric grill, 3.
PREHEAT icon is flashing on the display.
Press the ON/SELECT button again to start the 8 (eight)
4.
minute preheat.
When the preheat function ends an alarm will sound, the
5.
PREHEAT icon disappears and the PLACE icon appears.
Press the up and down arrow buttons to adjust Power
6.
Level to desired setting.
Place hot dogs on roller and cook until desired tenderness
7.
and wellness is reached.
Press the OFF button to shut grill off once cooking is
8.
completed.
Approximate cook times:
Regular size hot dogs: 8-12 minutes
Jumbo size hot dogs: 10-15 minutes
! NOTE: Cook times assume a preheated grill.
CAUTION: To avoid burns to skin, allow grill and roller to
cool for a minimum of 15 minutes before removing roller
for cleaning.