Baby Lock Grace (Previous Model) (BL40A) Quick Reference Guide - Manual (Page 4)

Winding the Bobbin
2
4. Slide the spool cap onto the spool pin.
5. Pull some thread off the spool and pass the thread under the thread guide, then behind the
thread guide, cover from the back to the front. Hold the thread with your right hand so that there is
no slack in the thread after placing it under the thread guide, and then pass the thread behind the
thread guide cover with your left hand.
6. Pull the thread, pass it under the hook of the bobbin-winding thread guide, and then wind the
thread counterclockwise between the discs, pulling it in as far as possible.
1 Hook for the bobbin-winding thread guide
2 Pretension disk
1 Thread guide
2 Thread guide cover
1
2