Baby Lock Imagine Wave (Previous Model) (BLE3ATW) Instruction and Reference Guide - Manual (Page 14)

1. Set the needle threader selector on "R" for right needle (fig.B page 13).
Note: Be sure to push the needle threader selector all the way to R.
2. Place the thread on the second from left spindle on the thread stand (fig.A). Thread needle thread
guides 1 and 2, through the groove on the face plate and through guides 3, 4, 5, 6 and 7. Pull a
6" length of thread through guide 7.
3. Lower the presser foot to engage the tensions.
4. Thread into eye of needle with the needle threader.
See the chart of needle threader page 13.
5. Continue pulling the thread loop manually through the needle eye until a single stand is threaded.
Place the thread under the presser foot and to the left.
S
E
R
G
E
R
S
E
T
U
P
12
Right Needle
2
1 A
B
C
D,4
E,5
F,6
2
3
G,7
B
Handwheel
A