Axel AX3000 75C Installation Guide - Manual (Page 14)

Quick Installation
10 Installation Guide - Models 75C
- Host IP address: if this field is left blank, DNS will be used to resolved
the hostname.
- Enable: This parameter varies the printing method depending on the
‘Session Type’ selected above.
If ‘Session Type’ is set to 5250 and a hostname is defined, PRT5250
(telnet printing) is automatically selected. For all other cases LPD is the
default printing system. This setting can easily be changed through
interactive set-up.
- Printer Name (accessible only if "Enable" is set): this is the printer name
at the operating system level.
- Manufacturer Type and Model (accessible only with Prt5250): printer
type and model.
After confirmation, all the AX3000 set-up parameters are updated.