Awind PPbox DHP-3020B User's Manual User Manual
Page 16
Awind User’s Manual
16
< Auto-Configuration Network Setup>
The default setting of the PPbox box is DHCP client. When the PPbox box is connected to a
LAN that already has a DHCP server present, the PPbox box takes an IP address assigned
to it by the server. When the PPbox box is connected to a LAN that does not have a DHCP
server, the PPbox box becomes the DHCP server in the network.
< IP Setup>
You can select “obtain IP address automatically” or “Use the following IP address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦ Wireless LAN: you can select “Enable” or “Disable”
♦ Region: default value is “Worldwide”.
♦ SSID: SSID string, max. Length is 32 bytes.
♦ SSID Broadcast: you can select “Enable” or “Disable”