Ip_ kam vid_ 1070 – Aviosys 9100B User Manual
Page 11
IP_ KAM VID_ 1070
After connecting the power and RJ 45 line, following the steps below to install the
software.
Step 1
: Install IP KAM by executes Setup.exe in the CD; choose setup language and
the install shield Wizard will help finish the program.
Step 2
: Then you can see shortcut icon
“IP KamVid 1070 “on desktop, click this icon.
Note
: Be sure that the power is turn on and the
RJ45 line is properly connected.
Step 3
: The KIPEDIT program will detect all the active IP9000s or IP9100s in the same
local Ethernet, and display the findings in the window.
Step 4
: Click the one you want to set, its name, IP will be displayed below. You can
change its name (please use numbers or letter) or IP (please set in the same subnet as
your PC) in the text windows. Then click Update. After about 20 seconds, the new
setting will work.
Default username : Administrator
Default password : 1234
* Only Administrator con setup the setting in configuration.
Step 5
: Double click the picture in the window of KIPEdit or type the IP address in the
IE browser, you can open the web page of IP9000A. If you can not open the web page
of IP9000, be sure that you have installed IE 6.0 with SP1 or later version.
- 10 -