Installation, Hardware, Driver & software – Aviosys 8810-D User Manual
Page 6: Installation procedure
6
Installation
Hardware
Connect the 8810-D board to PC by USB cable. Windows will show that there is
Un-know hardware detected . Then please install the driver and software from CD.
Note ：If use the option 12V Step Motor, user need to have the 12V power source first .
Please plug the power source to the green socket for 12V power in
( Left plus + &
Right negative - ) , and plug the 12V step motor to white socket and adjust the jumper as
following :
Driver & Software
Installation Procedure
1.
Please make sure that your PC had install .NET . or go to the link below here
to download before install USB PWM Motor 8810-D . :
2.
After install .NET, please put the CD in your CD ROM and it will execute
AUTORUN. file or you can open by Windows . Please use web browser
“ IE