Telnet – Aviosys 9258S User Manual
Page 30
IP POWER 9258 USER MANUAL
VER. 5.01
- 29 -
TELNET
The 9258 supports telnet protocol and can be controlled in a telnet enabled environment.
To Login to the 9258 in telnet
1.) Make sure to go to command prompt and type in Telnet and the IP Address of your 9258
device.
2.) Then type in the login and password in the following format.
admin:12345678
Telnet Commands
Help: The help command will provide all the commands available on the 9258.
To get the commands in help type: help in the telnet protocol.
Set power: The set power command allows the device to turn on and turn off ports on the
device. To set power on the device type
Telnet Command
Port 1
Port 2
Port 3
Port 4
setpower p6=1111
On
On
On
On
setpower p6=0000
Off
Off
Off
Off
setpower p6=0101
Off
On
Off
On
setpower p6=1010
On
Off
On
Off
Get power: The get power command gives you the current status of the device. To get power on
the device type: