Directed Electronics OHV901 - Manual (Page 19)

© 2005 Directed Electronics—all rights reserved
19
d
Connect & Disconnect from PC
CONNECT THE MEDIA PLAYER TO COMPUTER
1. Slide the power/lock switch up to power on the media player. Wait until the
main screen displays. The DMP040 will require use of the AC Power Adapter.
2. Plug the mini-end of the supplied USB cable to the media player, and the
other end to your computer’s USB port.
3. Once connected to your computer, the media player should be detected by
your computer operating system automatically. You will see the following
two messages on the DMP740 (no display on the DMP040).
NOTE: While the first message temporarily displays below and the com-
puter is connected to the DMP, DO NOT press the REC button! This
activates the automatic download function (the entirety of the
PC hard drive will start to download to the DMP!
USB Port
Power/Lock Switch