Avalon Firestyles 564 Electric Fireplace User Manual

Page 15

DIRECT OPERATION

1. Power ON/OFF switch

2. Heat control button

3. Flame control button

4. HEATER LED

5. POWER LED

Plug the heater into a suitable outlet.

1) “Power ON/OFF”

Set this switch to position I to turn the product ON. Setting it to O to turn the product OFF. The

POWER LED will be lit when the fireplace insert is on.

2) “Heat control button”

Press the HEAT button repeatedly to set the heater to the desired heat set. The HEATER LED will

indicate the current setting for the heater as shown below:

HEATER LED = Red = 1500W HEAT OUTPUT

HEATER LED = Blue = 750W HEAT OUTPUT

HEATER LED = Purple = AUTO MODE

Auto Mode

In this mode the heater will automatically turn on and off. When the room temperature drops below

71° F (22° C) the heater will turn on to the high heat setting (1500 watt). When the room temperature

is between 71° and 77° F (22-25° C) the heater output will switch to the low heat setting (750W). When

the room temperature goes above 77° F (25° C) the heater will turn off.

3) “Flame control button”

Press "Flame" button to adjust the flame intensity and ember bed brightness.

Press the "FLAME" control button to cycle through LO, MED, HI and OFF.

HIGH / 1500W

HEATER INDICATOR

LOW / 750W

HEATER INDICATOR

AUTO MODE

HEATER INDICATOR

OFF