Avalon Firestyles 1750 Spokane - Manual (Page 12)

12 Fireplace Insert Installation
(for qualified installers only)
© Travis Industries 100-01234 4141211
Surround Panel Installation
Rectangular Panels:
SURROUND PANEL SIZE HEIGHT WIDTH
8" 27 5/8" 40 3/8 "
10" 29 5/8" 44 3/8 "
12" 31 5/8" 48 3/8 "
Installation Instructions
1. With the insert 12” from the fireplace, install the side surround panels (see the directions below).
1750
Attach the side panels using the nuts and bolts
included with the stove.
REVERE
Attach the side panels using the studs on the side convection fronts and the nuts included with the stove.
Side Convection Front
(Revere Only)
NOTE: These flanges on the
side panels insert into the
convection channel.
2. Adjust the position of the side panels so they are: 1) flush with the bottom of the insert; 2) both the
same distance back from the front of the insert; 3) perpendicular to the floor (use the top panel, if
necessary, to judge alignment). Tighten the screws that hold the side panels in place.