ATI Audio ML200 - Manual (Page 6)

Audio Technologies Inc. ■ Toll Free 800-922-8001 ■ [email protected] ■ www. audio.com
TECHNICAL SPECIFICATIONS
GAIN
HI: 80, 70, 60 dB. LO: 60, 50, 30 dB
NOMINAL POWER
-50 dBu in, +4 dBm out at 40 dB preamp
gain
PEAK LEVELS
-20 dBu in, +22 dBm out to 600 ohm
balanced loads. 40 dB preamp gain
HARMONIC DISTORTION
.02% max. at Peak Levels, .01% max. at
Nominal Levels, 20 Hz to 20 kHz
FREQUENCY REPONSE
-.25 dB, 20 to 20,000 Hz
CROSSTALK
70 dB minimum at 10 kHz
INPUT IMPEDANCE
Balanced, 20 kohms bridging
OUTPUT IMPEDANCE
Balanced, 40 ohms maximum Zs
PHANTOM POWER
20.2 VDC regulated, PH48-1 48 VDC
phantom power accessories available.
DIMENSIONS in. (cm)
1.75” (4.45) H by 5.6” (14.2) W by 5.75”
(14.6) D; weight 1.25 lb, (.57 Kg) net
TECHNICAL SPECIFICATIONS
Jumper programmable, 50 to 100 ohms
INPUT LEVEL
250 mVrms maximum @ 1 KHz
5 mV nominal @ 1 KHz for+4 dBm out.
OUTPUT LEVEL
+18 dBm into 600 ohms, balanced or
unbalanced, 10 Vrms single ended into
high Z load.
CONNECTORS
XLR, locking
POWER
24 VDC @ .1A nominal, 22 Vmin. To 30
Vmax, loop thru cylindrical connectors, 2.0
mmID, sleeve is positive.