beautypg.com

Rear panel connectors – ART Pro Audio XL231 - Dual 31-Band, 1/3 Octave, Graphic EQ User Manual

Page 10

background image

ART XL 231 Dual 31 Band, 1/3 Octave Extended, Long Throw, Professional Equalizer

10

REAR PANEL CONNECTORS




POWER CORD

This cord is used to connect the AC power source to your equalizer. CAUTION:
Equipment for USA installation includes a power cord with a three pin polarized plug.
DO NOT REMOVE THE CENTER GROUNDING PIN.

FUSE HOLDER
This fuse holder contains the AC primary fuse. This fuse should be replaced with the
same type fuse if it is blown. If fuses continuously blow, stop replacing them and refer
servicing to qualified personnel. CAUTION: After checking the AC supply voltage, be
sure that the correct fuse is in the fuse holder - 0.5Amp for 95-125VAC, as well for 220-
240VAC. The orientation of the fuse holder determines the line voltage range and is
labeled on the rear of the holder. When changing the fuse, make sure that you insert the
holder in the correct orientation for your local line voltage.