ART Pro Audio USB Mix - Project Series - Manual (Page 11)

11
SPECIFICATIONS
Input Connections XLR balanced / 1/4" unbalanced “Combo” jack (Ch1 input)
1/4" balanced or unbalanced (Ch2-Ch3 inputs)
Output Connections 1/4" TRS balanced (Main Mix outputs)
1/4" TRS stereo (Monitor output)
Input Impedance 240k Ohms (Inst-HiZ), 20k Ohms (Line) (Ch1, Ch2-Ch3 1/4" inputs)
>4k Ohms (Ch1 XLR input)
Output Impedance <1k Ohms (balanced 1/4"), <500 Ohms (unbalanced 1/4")
100 Ohms (Monitor output)
Frequency Response 20 Hz – 20 kHz (+0, -1 dB)
THD <0.01% @ 1 kHz
CMRR >54dB typical
Phase Response All connections are phase coherent
Signal to Noise Ratio >90dB typical (Ref 0dBu)
Equivalent Input Noise -120dBu typical (XLR balanced, max gain), -100dBu typical (1/4")
Maximum Input Level +4dBu (XLR input), +14dBu (1/4" input)
Maximum Output Level +14dBu (Main Mix outputs), +13dBu (Monitor output)
Maximum Gain
(In to Main Out) +53dB (XLR), +32dB (1/4") (Ch1 input)
+10dB (1/4") (Ch2-Ch3 inputs)
(In to USB) +44dB (XLR), +23dB (1/4") (Ch1 input)
+1dB (1/4") (Ch2-Ch3 inputs)
(USB to Out) +14dB (Main Mix outputs), +13dB (Monitor output)
Phantom Power Switch selectable, +48V DC, filtered, current limited
A/D-D/A 16 Bit, 44.1 kHz or 48 kHz, USB selectable from computer
0.4 ms A/D latency @ 44.1 kHz
Computer Interface USB 2.0 compliant, Windows 7, Vista, XP, 2000, ME, 98SE
Mac OS 9.1 / OS X computers with native USB support, Linux
Chassis Type All steel black finish
Power Requirements 5.0V DC @ <500 mA (external) or USB bus powered @ 150 mA typical
Dimensions (HWD) 1.6" x 4.0" x 4.75"
41mm x 101mm x 121mm
Weight 1.1 lbs. (0.5 kg) with power supply and USB cable
Note: 0 dBu = 0.775Vrms
ART maintains a policy of constant product improvement. Therefore, specifications are subject to
change without notice.
Go to www.artproaudio.com for the latest information and support.