ART Pro Audio Tube MP - Project Series User Manual
Page 10
10
SPECIFICATIONS:
Frequency Response:
10Hz –40kHz (+0, -1dB)
Dynamic Range:
>100dB (20Hz to 20kHz)
THD:
<0.05%
(typical)
CMRR: >60dB
(typical)
Equivalent Input Noise:
-130dB (XLR to XLR ‘A’ weighted)
Maximum Input Level:
+16dBu (XLR)
+17dBu (1/4”)
Maximum Output Level:
+26dBu (XLR)
+20dBu (1/4”)
Input Connections:
¼” unbalanced (1meg Ohm),
XLR balanced
Output Connection:
¼” unbalanced (600 Ohm),
XLR balanced (<300 Ohm)
Maximum Gain:
70dB (XLR to XLR)
50dB (1/4” to XLR)
Input
Gain
Switch:
20dB
XLR Input Impedance:
4.7k Ohms / 600 Ohms, Switch selectable
High Pass Filter:
-3dB @ 40Hz, Switch selectable
Output Phase:
Normal / Invert, Switch selectable
Output Limiter Type:
Fast FET limiter, >20dB range, (+6dBu XLR, 0dBu ¼”)
Phantom
Power:
+48V
DC, Filtered, Current limited
Signal Metering:
Precise LED array, Fast attack, Musical release
30dB range, -15dB, -7dB, 0dB, Clip(+15dB)
Tube
Type:
12AX7A
hand
selected
Chassis Type:
All Aluminum black anodized with integral rubber sides
Power Requirements:
10Volts AC @ 700ma (typical)
Dimensions:
1.75”H x 5.9”W x 6.5”D (44.5mm x 150mm x 165mm)
Weight: 2.5
lbs.
(1.14
kg)
Note:
0dBu
=
0.775Vrms
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.