ART Pro Audio SPLITMix4 - Four Channel Passive Splitter/Mixer - Manual (Page 7)

Application Chart Descriptions
Figure 1. Traditional 4-in 1-out mixer with separate level
control for each channel.
Figure 2. 1-in 4-out “distribution mixer” configuration,
where each output channel can control different audio
zones.
Figure 3. Ch3 and 4 mix 2 sources into 1 output, while
Ch1 and 2 provide 2 outputs from the splitter input
source.
Figure 4. Ch2, 3, and 4 mix 3 sources into 1 output,
while Ch1 input passes thru level control to Ch1 output.
Figure 5. Splitter input feeds Ch2, 3, and 4 outputs,
while Ch1 input passes thru level control to Ch1 output.
Figure 6. Ch3 and 4 sources are mixed and fed to
external processor. Processor output is then split to Ch1
and 2 outputs.
Figure 7. Ch3 and 4 mix 2 sources into 1 output, while
Ch1 and 2 inputs feed Ch1 and 2 outputs with
independent level controls.
Figure 8. Splitter input feeds Ch3 and 4 outputs, while
Ch1 and 2 inputs feed Ch1 and 2 outputs with
independent level controls.