ART Pro Audio SLA1 - 100W Power Amplifier - Manual (Page 13)

- 13 -
SLA-1 SPECIFICATIONS
Dimensions
1.75”H x 19.0” W x 9.5”D
Weight 13.2 lbs., 6.0kg.
Input Connections XLR(balanced), ¼”TRS(balanced/unbalanced)
Output Connections Multi-Way Binding Post
Input Impedance XLR, ¼” 44k ohms (balanced), 22k ohms (unbalanced)
Input Sensitivity 1V for Full Power Output into 8 ohms
Stereo Output Power, 8 ohms 100Watts RMS per Channel,
Stereo Output Power, 4 ohms 130Watts RMS per Channel
Stereo Output Power, 16 ohms 55Watts RMS per Channel
Stereo Output Power, 5.5 ohms 114Watts per Ch, 25V line, unbalanced, direct
Bridged Output Power, 8 ohms 260Watts RMS mono
Bridged Output Power, 16 ohms 175Watts RMS mono
Bridged Output Power, 28 ohms 175Watts mono, 70V line, balanced, direct
Minimum Load Impedance, Stereo 4 ohms (normal operation) , stable to 2 ohms
Minimum Load Impedance, Mono 8 ohms (normal operation) , stable to 4 ohms
CMRR
>60dB (typical @ 1kHz)
Frequency Response 10Hz to 40kHz, +/- .5dB
Hum and Noise >100dB below clipping
Total Harmonic Distortion (THD) <0.05% (typical)
Slew Rate >20V/uS
Damping Factor >100
Transformer Type Toroidal
Power Requirements USA –120VAC 60Hz 600WATTS(max.)
JAPAN –100VAC 50Hz 600WATTS(max.)
EUROPE –220VAC 50Hz 600WATTS(max.)
AUSTRALIA 240VAC 50Hz 600WATTS(max.)
Export units configured for country of
destination.
ART maintains a policy of constant product improvement. ART reserves the right to
make changes in design or make additions to or improvements upon this product
without any obligation to install same on products previously manufactured. Therefore,
specifications are subject to change without notice.
Applied Research & Technology
215 Tremont Street
Rochester, NY 14608 USA
(585) 436-2720
(585) 436-3942 (FAX)
www.artproaudio.com
© 2001,2002 Applied Research & Technology