ART Pro Audio SCL2 - Dual / Stereo Compressor / Limiter Expander / Gate - Manual (Page 14)

13
SPECIFICATIONS
Input Impedance .................................. 10k Ohms
Output Impedance
Balanced/Unbalanced ............................ 200/100 Ohms
Maximum Levels
Inputs ..................................................... +21dBu
Output .................................................... +21dBu
Output Gain .......................................... +20dB max
Frequency Response .......................... 10Hz to 100kHz (+/- 0.5dB)
Dynamic Range ................................... >124dB (20-20kHz)
THD @ 0dBm Out: ............................... 0.05% (typical)
Equivalent Input Noise (EIN) ............... -97dBu (20-20kHz)
Attack Time ......................................... 0.25mSec. to 100mSec., variable
Release Time ....................................... 100mSec. to 3 Sec., variable
Slope .................................................... 1:1 to 20:1, variable
Dimensions .......................................... 1.75" x 19.0" x 5.9" (44.5 mm x 482.6 mm x
150mm)
Weight ................................................... 4.7 lbs. (2.1 kg.)
Power Requirements ........................... USA – 105 to 125 VAC / 60 Hz Export units
configured for country of destination.
.............................................................. 60 Watts Maximum - 10 Watts Idle
Note: 0 dBu = 0.775 V
RMS
ART maintains a policy of constant product improvement. ART reserves the right to make changes
in design, or make additions to, or improvements upon, this product without any obligation to install
same on products previously manufactured. Therefore, specifications are subject to change without
notice.