beautypg.com

Installation and operation – ART Pro Audio ProSplit - Transformer Isolated Mic Splitter User Manual

Page 6

background image

INSTALLATION and OPERATION:



Connect a low impedance dynamic or condenser
microphone to the MICROPHONE INPUT on the
PROSPLIT (alternately connect a line level signal to the
MICROPHONE INPUT and engage the front panel
INPUT PAD switch.).

Connect the DIRECT MICROPHONE OUTPUT to the
mic input on main mixer (switch phantom power on at
mixer if desired).

Connect the TRANSFORMER ISOLATED
MICROPHONE OUTPUT to the mic input on secondary
mixer or recording system.

Set GROUND switch to LIFT or GND. Use whichever
setting provides lowest noise performance.