beautypg.com

Installation and operation – ART Pro Audio DUALZDirect - Dual Professional Passive Direct Box User Manual

Page 6

background image

INSTALLATION and OPERATION:

1. Connect your instrument, line, or speaker level
signal to either of the INPUT 1 or 2 1/4" TRS phone
jacks. Connect one end of a phone jack cable to the
corresponding THRU 1/4' TRS phone jack and the other
end to where your signal was going to, if connecting the
DUALZDirect inline in the signal path. Repeat for the
other INPUT and THRU jacks if desired.

2. Connect a balanced line cable between the
corresponding OUTPUT 1 or 2 male XLR connector on
the rear panel and the balanced inputs of your audio
gear. Repeat for the other OUTPUT if desired.

3. Set the input ATTENUATOR switches for best
signal strength and clarity. Select the FILTER if desired
(it won't affect normal audio frequencies). Select the
GROUND LIFT feature to lower hum and other ground
loop noise, if present. The PHASE INVERT feature may
be used to correct phase error problems elsewhere in
the audio system.