ART Pro Audio CX310 - 2way/3way Crossover - Manual (Page 5)

5
INSTALLATION
The ART CX310 may be used in a wide variety of applications and environments. Enclosed in a 1U
(1.75 inches high) rack-mountable, all-steel enclosure, the unit is designed for continuous
professional use. The depth is 6.5 inches, exclusive of the power cord. Mounting location is not
critical. However, for greater reliability, we recommend that you not place the unit on top of power
amps or other sources of heat.
AC POWER HOOKUP
The CX310 has an internal power supply designed to operate from 105 to 120VAC at 50/60Hz.
Export units are configured with a different power cord and the voltage switch is set for the country of
destination. Before plugging the CX310 into the AC mains, make sure that all of the equipment
following the crossover outputs are turned off or that all of the outputs are turned down.
INPUT/OUTPUT CONNECTIONS
The CX310 has XLR and 1/4" TRS phone jack connectors for each input and output. All connections
are active balanced although the 1/4" phone jack connections can easily be converted to unbalanced
operation by using two-conductor phone plugs. Inserting a plug into a 1/4" jack disconnects the
associated XLR connector.
MONO 3-WAY CONFIGURATION
This information is intended to clarify how the CX310 is used in the mono 3-way configuration.
Connections:
Input
Channel One INPUT
(Channel Two INPUT not used)
Low Output Channel One LOW OUTPUT
Mid Output Channel Two LOW OUTPUT
High Output Channel Two HIGH OUTPUT
(Channel One HIGH OUTPUT not used)
Controls:
Input Level
Channel One INPUT LEVEL control
Low Output Mute Channel One LOW MUTE switch
Low Output Level Channel One LOW OUTPUT LEVEL control
Low/Mid Crossover Channel One RANGE switch and FREQUENCY control
(Channel One HIGH MUTE switch and
HIGH OUTPUT LEVEL control not used)
(Channel Two INPUT LEVEL control not used)
Mid Output Mute Channel Two LOW MUTE switch
Mid Output Level Channel Two LOW OUTPUT LEVEL control
Mid/High Crossover Channel Two RANGE switch and FREQUENCY control
High Output Mute Channel Two HIGH MUTE switch
High Output Level Channel Two HIGH OUTPUT LEVEL control