ART Pro Audio 311 - 2way Crossover w/ Subwoofer Out - Manual (Page 12)

311
 SPECIFICATIONS
Dimensions
1.75”H x 19”W x 5.5”D
Weight 4.85 lbs. (2.2 kg)
Input Connections XLR, ¼” TRS, balanced
Output Connections ¼”TS, unbalanced
Input Impedance 100K ohms
Output Impedance 220 ohms
Maximum Input Level +21dBu
Maximum Output Level +21dBu
CMRR >75dB (typical @ 1kHz)
Frequency Response 10Hz to 40kHz, +/-.5dB
Signal to Noise Ratio >95dB, Ref: 0dBu
20Hz to 20kHz, unweighted
Dynamic Range >114dB
Total Harmonic Distortion <0.01% (20Hz-20kHz,0dBu)
Crossover Filter Type
Fourth-order Linkwitz-Riley,
24dB/octave, state-variable
Crossover Frequency Range 250Hz to 6kHz
Subwoofer Filter Type
Two-pole Butterworth, 12dB/ octave
Subwoofer Frequency Range 50Hz to 250Hz
Power Requirements
USA – 110-125V AC / 50-60hz/ 15W
Export units configured for
country of destination.
ART maintains a policy of constant product improvement. ART reserves the
right to make changes in design or make additions to or improvements upon
this product without any obligation to install same on products previously
manufactured. Therefore, specifications are subject to change without
notice.
Applied Research & Technology
215 Tremont Street Rochester, New York 14608 U.S.A.
(585) 436-2720 - Voice
www.artproaudio.com
(585) 436-3942 - FAX E-mail: [email protected]
© 2002 Applied Research & Technology 311-5004-100
- 12 -