Directed Electronics VIPER 4103XV - Manual (Page 8)

2 © 2009 Directed Electronics. All rights reserved.
Remote Control Functions
The receiver uses a computer-based learn routine to learn the remote
control buttons. The remote control buttons indicated in all of the instruc-
tions in this manual correspond to a Standard Configuration.
➢
Standard Configuration
�������
Button
The lock function is controlled by pressing
�������
on the remote control for
one second. When held for more than 1.5 seconds, Panic is activat-
ed.
�������
Button
The unlocking function is controlled by pressing
�������
on the remote
control for one second. You can also turn Panic off with this button.
�������
Button
Silent Mode ™ and an optional auxiliary function are controlled by
pressing
�������
. Silent Mode works by pressing
�������
for less than one
second before locking or unlocking. An optional trunk release output is
controlled by pressing and holding
�������
for 1.5 seconds.
Button
The remote start function of your system is controlled by pressing this
button for one second.
Buttons +
�������
Car Finder is controlled by pressing these two buttons.
Buttons
�������
+ +
�������
When simultaneously pressed these buttons control the rear window
defogger during remote starting.