2 specifications, 3 system requirements – DXG Technology DXG-228 User Manual
Page 7
6
2-2 Specifications
●
Lens: F=8.5 mm
●
Image Sensor: 1/2" CMOS with 1.3 Megapixels
●
Focus: F / 2.8
●
Sensitivity: ISO 100
●
White Balance: Auto, Sunny, Tungsten, Fluorescent.
●
Shutter: Electrical
●
Shutter Speed: 1/4 sec. ~ 1/2000 sec.
●
Storage Medium: 16MB Internal Flash Memory
SD Card Slot (supports 4MB~512MB)
●
Image File Format: JPEG for Still Images
AVI for Motion Images
●
Image Resolution: Fine:
2048 x 1536 (Firmware Interpolation)
1600 x 1200
1280 x 960
800 x 600
●
Digital Zoom: 10-Step 4X Digital Zoom
●
Focal Range – Standard: 1.0m ~ Infinity
●
Focal Range – Macro: 20 ~ 25cm
●
Self-timer: 10 sec. delay
●
PC-CAM Mode: CIF (320 x 240) 20~30 fps
VGA (640 x 480) 15~25 fps
●
Flash Mode: Auto, Off
●
TV-OUT: NTSC/PAL system selectable
●
PC Interface: USB (Ver. 1.1)
●
Movie File: 60 seconds continuous with CIF (320 x
240) format (16MB internal memory)
●
Recordable Image Numbers (16MB):
800 x 600 1280x960 1600x1200 2048x1536
Fine 100 40 25 15
16MB
Normal 200
100
60
40
●
Power Supply: 2 x AAA Alkaline Batteries or supports
CRV-3
USB 5V (PC-CAM Mode)
●
Dimensions: 93 x 56 x 38 mm
●
Weight: About 120g (batteries excluded)
2-3 System Requirements
When operating the digital camera, we strongly
recommend you use a better computer system for
optimal performance. The minimal system requirement
for digital camera use is as follows: (For Macintosh
computers, only the mass storage features of the camera
apply)
System Requirements
OS Microsoft
Windows
98SE/Me/2000/XP
CPU
Intel Pentium 166MHz or higher
Memory
32 MB memory or above
CD-ROM
4X or above
HDD
Minimum 10MB free disk space on the
hard drive
Others
One standard USB 1.1 or USB 2.0 port