Dukane 8944 User Manual

Page 118

Click the

[Apply] button to save the settings.

• The new configuration settings are activated after restarting the

network connection. When the configuration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking

[Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

2. Equipment connection and network setting

2.5.2 Network Settings (Continued)

WEP Key

Input WEP key, which has same length defined by WEP.

When "64bit" or "128bit" is selected, input 10 characters or

26 characters respectively. Only numbers from "0" to "9" and

alphabets from "a" to "f" can be used.

WPA Passphrase

Input WPA Passphrase. Available number of input characters

is 8 to 63. Only alphabets, numbers and following symbols

can be used.

!"#$%&'()*+,-./[¥]^_`{|}~

SSID

Set SSID. Maximum number of input characters is 32. Only

alphabets, numbers and following symbols can be used.

!"#$%&'()*+,-./[¥]^_`{|}~

Item

Description

Wireless Mode

Mode

Select "AD-HOC" or "Infrastructure".

(Communication

channel)

Select using channel between "1" and "11".

Speed

(Communication speed) Select communication speed.
Encryption

Select data encryption method.

• Depending on the country where you are

the channels may vary. In addition, depending on the

country or region where you are may be required to use

a wireless LAN card that confirm to the standards in the

respective country or region.

NOTE

2.5 Configuring and controlling the projector via a web browser (Continued)