Argox AS Series - Manual (Page 112)

107
Exit
5) Repeat the same procedure in Insert G2 characters
setting.
6) Scan Exit barcode.
6)
Insert data group 1-4 position. Please refer to Chapter-
Transmission, page 65 and in specific barcode that you
want to use.
7) Insert data group 1-4 position: The scanner offers 4
positions to insert among the symbol. The position
default value is “00” to indicate no character insertion.
Beside, make sure insertion positions are not greater
than the symbols; otherwise the insertion data is not
effective.
Option Bar Code Option Alphanumeric
Entry
Insert G1 characters
setting
None
1-22 characters
00
✁
00-ffH ASCII
code
Insert G2 characters
setting
None
1-22 characters
00
✁
00-ffH ASCII
code
Program