AquaMAX CG20 Series - Manual (Page 17)

TEMPERATURE CONTROL
17
To operate the Kitchen controller:
1.
Turn off the Bathroom controller(s)
 If a temperature setting is displayed and the priority light is not glowing, it is necessary to turn off the
Bathroom controller(s) to gain priority.
 Refer to the notes on the Kitchen controller on page 16.
2.
Turn on the Kitchen controller
 Press the on / off button.
The on / off operating light and the priority light will both
glow.
The previous Kitchen controller temperature setting will
be displayed on the temperature display panel.
3.
Select the temperature setting
 Press the up () button or down () button.
 Refer to “Temperature Adjustment” on page 15.
The selected temperature setting will be displayed on
all controllers.
4.
Open the hot tap.
The in use light will glow on all controllers.
5.
Close the hot tap.
The in use light will go out on all controllers, if no other
hot tap is open.
6.
Turn off the Kitchen controller
 Press the on / off button.
The priority light and on / off operating light will go out
and the temperature display will go blank.
Important: Turn off the Kitchen controller after hot water usage
is finished in the kitchen and / or laundry. Refer to
Important
note for Bathroom controllers on page 18.
water
volume
on
off
ch eck
h ot water
temperatu re
b efore u s e
50
C
priority in use
x10 l
55
C
priority in use
x10 l
55
C
priority in use
x10 l
55
C
priority in use
x10 l
water
volume
on
off
ch eck
h ot water
temperatu re
b efore u s e
C
priority in use
x10 l