April Music Stello DA100 MKII - Manual (Page 5)

DA100 MKII
stello DA100 MKII DSD DAC
Caution
page 3
▶AC Switch
The switch is located on the Front Panel and when it’s on the off
position, the electrical current is completely cut-off. When
switched on, the DA100 MkII becomes operational. Switch off the
product during the extended period of no use.
▶Unbalanced Connection
The unfiltered or ground noise may occur in the unbalanced
connection in the system due to less than optimal AC connection.
This is especially true of the PC connection and the digital or
earth noise may occur when the system is connected to different
AC outlets.
In order to prevent the noise from occurring during operation, the
DA100 MKII is equipped with the “Ground Floating” slide switch
on the bottom of the chassis. The switch is in the “OFF” position
and the chassis and ground are connected. If the noise occurs
during operation, slide the switch to “ON” position and the
ground will be floating.
If the noise problem persists, please contact your local April Music
dealer or distributor.
▶Heat
The DA100 MKII will warm up to certain level during its operation.
The elevated temperature will not harm the device. However, do
not place other equipments on top the DA100 MkII as it may be
harmful to the device.