Aplex Technology ACS-2120 User Manual

Page 41

ACS-2120 User Manual

Note: Due to limited address length of BIOS, only a portion of panel parameters are listed in

BIOS Setup. If the connected panel is not included in the parameter list, display

problem will occur. In this case, Please do not change BIOS setup

3.8.1 North Bridge Configuration

BIOS SETUP UTILITY

Chipset

North Bridge Chipset Configuration

Options

Auto

Max MHz

← Select Screen

↑↓ Select Item

+- Charge Field

F1 General Help

F10 Save and Exit

ESC Exit

PCI MMIO Allocation: 4Gb To 3072MB

DRAM Frequency [Auto]

Configure DRAM Timing by SPD [Enabled]

Initate Graphic Adapter [IGD]

Internal

Graphics

Mode

Select

[Enable,8MB]

PEG Port Configuration

► Video Function Configuration

DRAM Frequency:

[Auto]

[Max MHz]

Configure DRAM Timing By SPD:

[Enabled]

[Disabled]

Initate Graphic Adapter:

Select which graphics controller to use as the primary boot device.

[IGD]

[PCI/IGD]

[PCI/PEG]

[PEG/IGD]

[PCIE/PCI]