Aplex Technology ACS-2663C - Manual (Page 35)

ACS-266XC User Manual 35
1 DCD# (Data Carrier Detect)
2 RXD (Received Data)
3 TXD (Transmit Data)
4 DTR (Data Terminal Ready)
5 Ground
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 RI (Ring Indicator)
USB10,USB11:
(Double stack USB type A), I/O USB connector, it provides up to 2 USB2.0 ports, speed up to
480Mb/s. USB10 and USB11 connected to ASB-M7101 MIO1 USB0 and USB1.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into different
Receptacle.
CF:
(CF Card socket), it is located at TB-522 and serves as an insert interface for Type I and Type II
Compact Flash card. The operating voltage of CF card can be set as 3.3V or 5V. The default
setting of the product is 5V.
MIO1:
(DF13-40P) TB-522 MIO1 via a dedicated cable connected to ASB-M7101 MIO1.
Signal Name Pin# Signal Name
422_RX+ 1 2 485+_422TX+
422_RX- 3 4 485-_422TX-
Ground 5 6 NC
NC 7 8 NC