Aplex Technology APC-3918P User Manual

Page 51

APC-3918P User Manual

Note: Due to limited address length of BIOS, only a portion of panel parameters are listed in

BIOS Setup. If the connected panel is not included in the parameter list, display

problem will occur. In this case, Please do not change BIOS setup

3.8.1 North Bridge Configuration

BIOS SETUP UTILITY

Chipset

North Bridge Chipset Configuration

ENABLE: Allow

Remapping of

Over lapped PCI Memory

Above the total

Physical memory

DISABLE: Do not allow

remapping of memory

← Select Screen

↑↓ Select Item

+- Charge Field

F1 General Help

F10 Save and Exit

ESC Exit

Memory

Remap

Feature

[Enabled]

PCI MMIO Allocation: 4Gb To 3072MB

Memory

Hole

[Disabled]

Initate Graphic Adapter [PCI/IGD]

IGD

Graphics

Mode

Select

[Enabled ,64MB]

IGD GTI Graphic smemory size [No VT

mode,2MB]

PEG Port Configuration

► Video Function Configuration

Memory Remap Feature:

[Enabled]

[Disabled]

Memory Hole:

[Disabled]

[15MB-16MB]

Initate Graphic Adapter:

Select which graphics controller to use as the primary boot device.