DigiTech RP50 User Manual

Page 19

Equalization is used to shape the tonal response of your guitar signal. The EQ in the RP50
is similar to the tone knobs on an amplifier. Values 1-4 cut the level of each band, 5 is flat
(no cut or boost), and values 6-9 boost the level of each band.
Bass (

b1- b9 ) - The Value buttons adjust the amount of low end enhancement (Bass).

Mid (

d1- d9)- The Value buttons adjust the amount of mid range enhancement.

Treble (

t1- t9)- The Value buttons adjust the amount of high end enhancement (Treble).

Noise Gate

A Noise Gate is designed to eliminate noise while you are not playing. The AutoSwell
setting creates a volume pedal effect automatically with varying attack times. Different
guitars and pickups require different threshold settings. Choose a setting that fully mutes
the sound when you are not playing for the lowest setting.
Of. G1-G9 - Selects the Silencer™ Noise Gate. Settings 1-9 select the threshold. Of turns

the gate effect off.

s1-s9 - Selects the Auto Swell volume swell effect. Settings 1-9 select the attack time.

Chorus/Mod

The Chorus/Mod module is a multi-function module that lets you select the following
effects: Chorus, Flanger, Phaser,Tremolo, Panner,Vibrato, Rotary Speaker, AutoYa™,
Envelope, Detune, Pitch Shift, and Whammy™ effects. When the Chorus/Mod module is
selected, the Value buttons are used to choose the type of effect. Only one of the effects in
this row can be used at a time. The following list describes each effect and their
parameters in more detail.