Aplex Technology APC-3228A User Manual

Page 55

APC-3228A User Manual

← Select Screen

↑↓ Select Item

Enter Charge

F1 General Help

F10 Save and Exit

ESC Exit

Change Supervisor Password:

Install or Change the password.

Change User Password:

Install or Change the password.

Password Check:

[Setup]

[Always]

Setup: Check password while invoking setup.

Always: Check password while invoking setup a well as on each boot.

Boot Sector Virus Protection:

[Disabled]

[Enabled]

Enabled / Disabled Boot Sector Virus Protection.

Type the password with up to 6 characters and then press Enter key. This will

clear all previously typed CMOS passwords. You will be requested to confirm the

password. Type the password again and press Enter key. You may press Esc

key to abandon password entry operation.

To clear the password, just press Enter key when password input window pops up.

A confirmation message will be shown on the screen as to whether the password will

be disabled. You will have direct access to BIOS setup without typing any password

after system reboot once the password is disabled.

Once the password feature is used, you will be requested to type the password each

time you enter BIOS setup. This will prevent unauthorized persons from changing

your system configurations.

Also, the feature is capable of requesting users to enter the password prior to system

boot to control unauthorized access to your computer. Users may enable the feature