Apantac MT HOOD Series VGA Extenders - Manual (Page 12)

Apantac – MT HOOD - VGA Extenders USER GUIDE Page 11 of 18
VGA-4-SE / VGA-SER – 4-port VGA Splitter Extender /
Receiver Installation
1. Site Selection: For first time installation, place
Extender near the PC or AV devices; you can use rack
mounting kit to fix the system box.
2. Connecting Monitor and Speaker: Plug power
adapter to the Extender and connect monitor and
speaker to “VGA/AUDIO OUT” port. The POWER LED
will turn ON green to indicate the POWER ON status
and “ACTIVE” LEDs should turn OFF to indicate the
unconnected status. Then prepare VGA and Audio
cables to connect the signal from your AV device to the
“VGA/AUDIO IN” port of the Extender box.
3. Local Function Test: Power ON your AV device, the
“ACTIVE” LEDs of the Extender will turn ON orange to
indicate the video activation. You are now ready for AV
broadcasting.