AMETEK SGWC Series - Manual (Page 19)

M550129-20 REV D 2-5
1. AC Input Connector, Phoenix Contact P/N HDFKV 16-VP, Ametek P/N 893-100-02
2. Chassis Protective Ground, 1/4-20 stud
3. Output Busbar, Positive Terminal, with hole for 3/8-16 bolt
4. Output Busbar, Negative (Return) Terminal, with hole for 3/8-16 bolt
5. Paralleling Input Connector, 9 Pin, D-Subminiature
6. Paralleling Output Connector, 9 Socket, D-Subminiature
7. Analog Interface Connector, 25 Socket, D-Subminiature
8. Remote Sense Connector, 3 Pin, Molex P/N 39-01-4033, Ametek P/N 09-070-000-04
9.
Water Outlet, 3/8” FNPT bulkhead fitting (1 1/8” across flats)
10. Water Inlet, 3/8” FNPT bulkhead fitting (1 1/8” across flats)
Figure 2-3. Rear Panel Connections
2 1
4
5 3 6 7
8 9
10