AMETEK HPAL - Manual

Technical Note
ReFlex Power™ Mating Connectors for HPAL/LPAL Module
Document No. W380273-01 Rev D • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com
1 of 3
PURPOSE
Provide mating connector information for the ReFlex Power™ High Power and Low Power Active Load (HP/LPAL) module.
Figure 1. HP/LPAL Front Panel View
MATING CONNECTOR KIT
Load (HPAL/LPAL) Mating Connector Kit - AMETEK Part No. 5380273-01, mates with RFP-L3500-375-XXXX and RFP-L3500-
750-XXXX, and includes the following for both the Interface and DC input connectors:
Bill of Material
Item
AMETEK
Part No.
Description Qty
Manufacturer
Part No.
Manufacturer Suggested Source(s)
1 855-363-08
Conn, 4P, 8/16AWG,
Plug, SR, Skt
1 MS3106F-20-24S
Amphenol,
ITT Cannon PEI-Genesis: http://www.pei-genesis.com/
Arrow Electronics: http://www.arrownac.com/
2 856-214-09
Conn, 9P, DSUB, 20-
24AWG, Crimp, Male
1 SD9M1000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
3 856-247-10
Conn, Backshell, 9P,
DSUB, 2 PC
1 D9000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
RECOMMENDED TOOLS (NOT INCLUDED WITH MATING CONNECTOR KIT)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02