Optional interface connector accessories, Dc output connector, Dc output pinout – AMETEK LPDC-16V User Manual
Page 3
Technical Note
ReFlex Power™ Mating Connectors for LPDC-16V Module
Document No. W380270-01 Rev E •
1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email:
• Web:
www.programmablepower.com
3 of 4
OPTIONAL INTERFACE CONNECTOR ACCESSORIES
•
AMETEK P/N 5380508-01, 9-pin Loop-back Connector Assembly. Includes a jumper wire between Pins 1 and 6 to enable
the module outputs.
•
AMETEK P/N 5380443-01, Power Module 9ft. Unterminated Interface Cable Assembly. Use when interfacing to an external
system.
•
AMETEK P/N 5380443-03, Power Module, Right Angle, 9ft. Unterminated Interface Cable Assembly. Use when interfacing
to an external system.
DC OUTPUT CONNECTOR
Connector: Positronic Industries P/N CBD13W6M2000Z, AMETEK P/N 856-214-07
Pin: Positronic Industries P/N MC4010D, AMETEK P/N 856-745-51
Backshell: Positronic Industries P/N D37000Z00, AMETEK P/N 856-247-39
Wire size: Refer to table for recommended wire gauge/length
DC OUTPUT PINOUT
A1
A2
A3
A4
A5
A6
2-3
4
DC Output
Out
N/U
Chas Gnd
Sense_Rtn
Sense
Out_Rtn
Out
Out_Rtn
5
6-7
1
N/U
T/P
T/P
T/P
T/P
T/P
T/P
Load
T/P = Twisted Pair; N/U = Not Used
N/U
N/U
Figure 3. DC Output Connector, Front Panel View, and DC Output Connector Wiring Diagram
Pin Name
Function
Signal
Level
Max. Wire
Gauge, AWG
Max. Wire
Length, ft
A1 OUT
Output: module output source;
connected to A3
±16V; ±200V,
maximum to chassis
10
100, for 1.5V line
drop at 10.3A
A2 OUT-RTN
Output: return for output source,
OUT; connected to A4
±16V; ±200V,
maximum to chassis
10
100, for 1.5V line
drop at 10.3A
A3 OUT
Output: module output source;
connected to A1
±16V; ±200V,
maximum to chassis
10
100, for 1.5V line
drop at 10.3A
A4 OUT-RTN
Output: return for output source,
OUT; connected to A2
±16V; ±200V,
maximum to chassis
10
100, for 1.5V line
drop at 10.3A
1 SNS
Input: remote sense connection for
OUT
±16V; ±200V,
maximum to chassis
20 100
5 SNS-RTN
Input: remote sense connection for
OUT-RTN
±16V; ±200V,
maximum to chassis
20 100
4 CHAS-GND Shield
ground
Chassis
ground
20
100
A5, A6,
2,3,6,7
- Reserved
- - -