D-Link XTREME G DWL-G820 - Manual (Page 15)

15
Using the Configuration Menu (continued)
Advanced > Mode
Service Type-
AP Client
Apply -
MAC Address - Media Access Control Address
A unique hardware address that identifies a device on a network. It is assigned at
the factory and cannot be changed. Usually you will find this address on a sticker
on the device or on the packaging.
Site Survey-
An Infrastructure
network includes a
router or an access
point; an Ad-Hoc
network is a Peer-to-Peer
network with a
direct communication
between two DWL-G820s.
Root AP MAC
Address-
SSID-
In Infrastructure mode: Enter the MAC Address of the access point or
router in your network.
In Ad-Hoc mode: Enter the IP address of the DWL-G820 that you will be
in Peer-to-Peer communication with.
Select Infrastructure or Ad-Hoc.
In Infrastructure mode: Enter the SSID of the access point or router in
your network.
In Ad-Hoc mode: Enter the SSID of the DWL-G820 that you will be in
Peer-to-Peer communication with.
Click Site Survey to view the available networks
Click Apply if you have made any changes.